018.jpg018.jpg

Bend Tester

The Interlaken 90° Bend Tester is a triple acting, servo controlled, hydraulic system used for metal formability testing. The triple actions are comprised of two linear actuators set 90° from one another and a rotary actuator set on center, where the two linear intersect. The rotary height is adjustable to allow the tangents of the outside of the roller to touch the centerlines of the linear actuators. Each linear actuator is a double-end actuator with its own load cell. These axes utilize force and position sensors and can be independently controlled using either force or position as a feedback. ​This system is comprised of a main loading frame and Hydraulic Power Supply.

Categories: ,

Specifications

The Interlaken 90° Bend Tester is a triple acting, servo controlled, hydraulic system used for metal formability testing. The triple actions are comprised of two linear actuators set 90° from one another and a rotary actuator set on center, where the two linear intersect. The rotary height is adjustable to allow the tangents of the outside of the roller to touch the centerlines of the linear actuators. Each linear actuator is a double-end actuator with its own load cell. These axes utilize force and position sensors and can be independently controlled using either force or position as a feedback. ​This system is comprised of a main loading frame and Hydraulic Power Supply. The HPS provides the hydraulic pressure for the Left, Right and Rotary feeds. The Hydraulic Service Manifold (HSM) and Servo Manifold provide the local servo control and pressure accumulation for the actuators, as well as safety blocking and pressure isolation. The typical work that is done on sheet metal samples is a clamping operation on each end of the sample strip, then a 90° pull over a rolling or fixed bead that can be heated to 400° F. The Bend Tester is able to run samples up to 2″ wide and has a travel of 10″ at forces up to 11,000 lbs.

About Us

We wish to convey our honest gratitude to the continued patronage of all our well-wishing clients those have extended their warm and treasured support to the little MIC since its inception in 2005 to stand tall as Measure India Corporation Pvt Ltd and rise to the market expectations for one and half decades.

Contact Us