Specifications
The system is comprised of five sub-systems:
● A single-acting, servo-controlled hydraulic press with mode switching during the process.
● Servo-controlled Hydroforming Feed Actuators that are fully integrated.
● A Servo-controlled Pressure Intensifier with pressure control valves. A variety of pressure and flow options are available.
● Interlaken designed tooling with changeable die inserts for differing cavity shapes that can be run with or without end feed.
● A B&R PC/Controller with 3rd generation Intel i7 processor.
| SPECIFICATIONS | 500 Ton | 1000 Ton |
|---|---|---|
| Press Clamping Force | 4400kN/500 Tons | 8800kN/1000 Tons |
| Standard Bed/Bolster | 2336mm x 1549mm 92 in. W x 61 in. D | 2336mm x 1549mm 92 in. W x 61 in. D |
| Stroke | 500mm/20 in. | 500mm/20 in. |
| Daylight | 1041mm/41 in. | 1041mm/41 in. |
| Feed Actuator Force | 660kN/75 Tons | 1020kN/115 Tons |
| Feed Actuator Stroke | 200mm/8 in. | 200mm/8 in. |
| Forming Pressure | 137MPa or 206MPa or 310Mpa or 413MPa 20,000psi or 30,000psi 45,000psi or 60,000psi | 137MPa or 206MPa or 310Mpa or 413MPa 20,000psi or 30,000psi 45,000psi or 60,000psi |
| Minimum Digital Display for Stroke | 0.01mm / 0.001 in. | 0.01mm / 0.001 in. |
| Minimum Digital Display for Force | 0.01kN / 0.001 tons | 0.01kN / 0.001 tons |
| Power | 200A, 460V, 3 phase20A, 115V, 1 phase | 200A, 460V, 3 phase20A, 115V, 1 phase |
| Cooling Water | 15gpm max P @ 70°F | 15gpm max P @ 70°F |
| Weight | 85,000 lbs. | 100,000 lbs. |
| Footprint | 16’W x 17’ D x 17’ tall | 16’W x 17’ D x 17’ tall |