Mail : Call Us : +91-40-27150157, 40165582

Servo Hydraulic Universal Test Systems

HUT – D Type Static

Features

  • Load capacities 600kN, 1000kN & 2000kN
  • Top cross head mounted bi-directional differential actuators
  • Excellent alignment and good shock absorption
  • Single zone design ensures all tests finish in one sapce
  • Testing speed range: 0.01 to 360 mm/min
  • Position control resolution down to 0.00002mm
  • Moog servo valives for high accuracy control
  • Long strokes up to 780mm
  • Horizontal test space up to 770mm
  • Tension test space up to 800mm
  • Compression test space up to 540mm
  • Works out of 3Ø 440 VAC
  • 32 bit Digital Signal Processor based controller
  • 5kHz servo loop update rates
  • Load accuracy ± 0.5% of read out value down to 1/100th of full capacity
  • Speed accuracy± 0.5% of set speed
  • Position accuracy ± 0.5% of read out
  • Strain accuracy ± 0.5% of read out value down to 1/50th of travel range
  • 0-1.0 KHz data acquisition rates
  • NACHI gear pumps from Japan for low noise operation for hydraulic power packs

Applications

  • Tensile, Compression, 3 – Point bend Static
  • Fasteners, Rebars, Chains, Welds, Castings etc
 

HUT – DP Type Dynamic

Features

  • Load capacities 600kN, 1000kN & 2000kN
  • Top cross head mounted bi-directional differential actuators
  • Excellent alignment and good shock absorption
  • Single zone design ensures all tests finish in one sapce
  • Testing speed range: 0.01 to 360 mm/min
  • Position control resolution down to 0.00002mm
  • Moog servo valives for high accuracy control
  • Long strokes up to 780mm
  • Horizontal test space up to 770mm
  • Tension test space up to 800mm
  • Compression test space up to 540mm
  • Works out of 3Ø 440 VAC
  • 32 bit Digital Signal Processor based controller
  • 5kHz servo loop update rates
  • Load accuracy ± 0.5% of read out value down to 1/100th of full capacity
  • Speed accuracy± 0.5% of set speed
  • Position accuracy ± 0.5% of read out
  • Strain accuracy ± 0.5% of read out value down to 1/50th of travel range
  • 0-1.0 KHz data acquisition rates
  • NACHI gear pumps from Japan for low noise operation for hydraulic power packs
  • Side acting hydraulic grips for superior slip less gripping

Applications

  • Tensile, Compression, 3 – Point bend Static & Cyclic
  • Fasteners, Rebars, Chains, Welds, Castings etc
 

HCT SERIES STATIC SERVO HYDRAULIC COMPRESSION TEST SYSTEMS

Features

  • Load capacities
    • Type A: 300kN, 600kN, 1000kN, 2000kN & 3000kN
    • Type B: 1000kN, 2000kN & 3000kN
    • Type C: 1000kN, 2000kN, 3000kN & 5000kN
  • 2 or 4 column construction with excellent alignment and good shock absorption
  • Servo hydraulic driven piston to apply compressive loads
  • Testing speed range: 0.1 to 200 mm/min
  • Loading rates: 0.02% of FS/sec to 2% of FS/sec
  • Encoder based feed back for excellent position control
  • Position control resolution down to 0.01mm
  • Moog servo valives for high accuracy control
  • Piston strokes up to 130mm
  • Horizontal test space up to 600mm
  • Tension test space up to 1100mm
  • Compression test space up to 400mm
  • Compression platen diameter 300mm
  • Works out of 3Ø 440 VAC
  • 32 bit Digital Signal Processor based controller
  • 5kHz servo loop update rates
  • Uses Strain Gaged Load Cell for accurate load values
  • Load accuracy ± 0.5% of read out value down to 1/100th of full capacity
  • Speed accuracy± 0.5% of set speed
  • Position accuracy ± 0.5% of read out
  • Strain accuracy ± 0.5% of read out value down to 1/50th of travel range
  • 0-1.0 KHz data acquisition rates

Applications

  • Compression testing of building materials
  • Concrete blocks
  • Concrete cubes
  • Concrete slabs

About Us

Measure India Corporation (MIC) was founded in the year 2006, based at Hyderabad, India, by well experienced engineers in the field of material testing. It was started with a goal to provide arguably the best possible, yet, affordable solutions for materials and components

Videos